Review shop drawings in minutes
Upload the project specification and a related product, equipment, or material submittal. Shopdrawing.AI compares the submission against the applicable requirements and produces a structured first-pass review.
- 1Upload spec
- 2Upload submittal
- 3Review results
- 12,000 CFM12,000 CFMCompliant
- 3.0 in. w.g. external static3.0 in. w.g.Compliant
- Double-wall casingDouble-wall casingCompliant
- 2-inch casing insulation1-inch casing insulationDeviation
- MERV 13 final filtersMERV 13 filtersCompliant
- Stainless-steel drain panDrain pan material not identifiedWarning
- Spec12,000 CFMSubmitted12,000 CFMCompliant
- Spec3.0 in. w.g. external staticSubmitted3.0 in. w.g.Compliant
- SpecDouble-wall casingSubmittedDouble-wall casingCompliant
- Spec2-inch casing insulationSubmitted1-inch casing insulationDeviation
- SpecMERV 13 final filtersSubmittedMERV 13 filtersCompliant
- SpecStainless-steel drain panSubmittedDrain pan material not identifiedWarning
What Shopdrawing.AI reviews
Review product, equipment, and material submittals against the project specification across mechanical, electrical, plumbing, architectural, structural, and controls scopes.
Mechanical
HVAC equipment, ductwork, fans, pumps, controls, and accessories
Electrical
Switchgear, panels, lighting, conduit, transformers, and equipment
Plumbing
Piping, fixtures, water heaters, valves, and plumbing equipment
Architectural
Doors, windows, finishes, partitions, ceilings, and specialty items
Structural
Steel, concrete, anchors, reinforcing, connection hardware, and assemblies
Controls / BAS
Sensors, controllers, panels, software, actuators, and field devices
Best for manufacturer submittals, product data, equipment schedules, and material submissions tied to a project spec.
From project spec to first-pass review
Upload the project spec
Add the full project specification or the relevant specification sections.
Upload the product submittal
Add the manufacturer package, product data, equipment schedule, or material submission.
Review the findings
Receive compliant items, warnings, deviations, missing information, spec references, and suggested comments.
- Reduce review time
- Catch missing information
- Identify spec deviations
- Prepare review comments
See how a submittal compares to the project spec
Each finding connects submitted product information to the applicable specification requirement.
View Full Sample Review- CompliantAirflow — 12,000 CFM
Matches specified design airflow.
- CompliantExternal static pressure — 3.0 in. w.g.
Matches specified fan duty.
- CompliantDouble-wall casing
Meets specified casing construction.
- DeviationCasing insulation — 1 inch submitted
Specification requires 2-inch casing insulation.
- CompliantMERV 13 final filters
Meets specified filtration requirement.
- WarningDrain pan material not identified
Confirm stainless-steel drain pan as required by the specification.
Reviewed for general conformance with the design concept of the project. Revise casing insulation to 2 inches and confirm stainless-steel drain pan construction. Resubmit updated product data.
Built for the teams reviewing submittals
Consultants
Pre-review submissions, identify missing information, and prepare clearer review comments.
Contractors
Check submittals before consultant submission and catch gaps or deviations earlier.
Architects
Review products, finishes, hardware, and specialty submittals against the specification.
Project managers
Understand missing data, deviations, and review risk across multiple disciplines.
Catch submittal issues earlier
Compare submittals against the project spec before formal consultant review.